Blade for snow removal on any truck

Overall wing blade width, mm

3000

Overall height of blade, mm

1000

Working height of the wing blade, mm

900

The shape of the wing

To increase the strength - rounded, made by rolling.

metal blade wing thickness, mm

3

Weight of complete blade, kg

400

The material from which the blade is made

Steel ST-3

The width of the snow removing not less than, mm

2600

Longitudinal stiffeners, NY

longitudinal pipe 60h40h3.5

The rear stiffener plate 6 mm thick piece

6

The width of the rubber knife, mm

250

The length of the rubber knife

3000

The thickness of the rubber blade, mm

40

Number of fixing the rubber blade bolts

26

Size lift cylinder, mm

50h30h320

Number of turning cylinders

2

Size turning cylinder, mm

50h30h320 / 74h55h30h500 AT THE DISCRETION OF THE MANUFACTURER

Protection from falling snow onto the front of the base car's glass cockpit

Provided the original design the blade housing.

OPTSIYA- rubber apron

Device for fixing the blade in the transport position

clamp

The operating angle lateral position to the left to the right, however, hail

From minus 30 to plus 30

Additional protection to prevent arbitrary lowering the blade

pilot controlled check valve sided

Ensuring smooth operation of hydraulic cylinders

Throttle

The mounting plate on the vehicle.

Thickness of 16 mm, a universal, allows the front urban, high-speed blades, brushes of various modifications.